ZJC-50KV絕緣材料的耐電壓性能測試儀/耐擊穿性能檢測儀器

ZJC-50KV絕緣材料的耐電壓性能測試儀/耐擊穿性能檢測儀器

ZJC-50KV

一、用途
First, the use of
      ZJC-50KV采用計算機控制，通過人機對話方式，完成對絕緣介質的工頻電壓擊穿，工頻耐壓試驗。主要適用于固體絕緣材料如絕緣漆、樹脂和膠、浸漬纖維制品、云母及其制品、塑料、薄膜復合制品、陶瓷和玻璃等介質在工頻電壓或直流電壓下?lián)舸姸群湍碗妷簳r間的測試；采用計算機控制，可對試驗過程中的各種數據進行快速、準確的采集、處理，并可存取、顯示、打印。
ZJC-50KV controlled by computer, through the man-machine dialogue mode, the voltage breakdown insulation, power frequency withstand voltage test. Mainly applicable to solid insulating materials such as insulation paint, resin and rubber, impregnated fiber products, mica products, plastic film, and composite products, ceramic and glass medium in the frequency of the voltage or DC voltage breakdown strength and voltage withstand the test of time; controlled by computer, the various test data in the process of rapid, accurate data acquisition, processing, and storage, display and print.
二、依據標準
Two, according to the standard
1、GB1408.1-2006《絕緣材料電氣強度試驗方法》
1, GB1408.1-2006 "electrical strength of insulating materials test method"
2、GB1408.2-2006《絕緣材料電氣強度試驗方法 
2, "GB1408.2-2006 electrical strength of insulating materials test methods
        第2部分：對應用直流電壓試驗的附加要求》
Part second: Additional requirements for tests using direct voltage "
3、GB/T1695-2005《硫化橡膠工頻擊穿電壓強度和耐電壓的測定方法》
3, GB/T1695-2005 "vulcanized rubber power frequency breakdown voltage strength and resistance to voltage measurement method"
4、ASTM D149《固體電絕緣材料工業電源頻率下的介電擊穿電壓和介電強度的試驗方法》
4. D149 ASTM test method for dielectric breakdown voltage and dielectric strength of solid electrical insulating material industrial power frequency
三、功能：
Three, function:
1、試驗過程中可動態繪制出試驗曲線，試驗的曲線可以多種顏色疊加對比。
1, the test process can be dynamically drawn out of the test curve, the curve can be compared to a variety of color overlay.
2、可對試驗數據進行編輯修改，靈活適用；
2, the test data can be edited and modified, flexible;
3、試驗條件及測試結果等數據可自動存儲；
3, test conditions and test results and other data can be stored automatically;
4、試驗報告格式靈活可變，適用于不同用戶的不同需求；
4, test report format flexible, applicable to different needs of different users;
5、可對一組試驗中曲線數據的有效與否進行人為選定；
5, can be used for a group of test data in the curve of the effective or not artificially selected;
6、試驗結果數據可導入EXECL,WORD文檔編輯；
6, the results of the test data can be imported into WORD, EXECL document editing;
7、過電流保護裝置有足夠的靈敏度，能夠保證試樣擊穿時在0.1S內切斷電源；
7, over current protection device with sufficient sensitivity, to ensure that the sample breakdown in the 0.1S cut off the power supply;
8、儀器運行的持久性: 儀器可連續運行使用，不需為保護儀器而定期停機。
8, the persistence of the operation of the instrument: the instrument can be used continuously, without the need for the protection of equipment and regular downtime.
四、主要技術參數：
Four, the main technical parameters:
1、輸入電壓：    AC 220V
1, input voltage: AC 220V
2、輸出電壓AC：  0～50KV；DC：0～50KV
2, the output voltage of AC: 0 ~ 50KV; DC:0 ~ 50KV
3、輸出功率：    5KVA
3, output power: 5KVA
4、測量范圍：    0KV～50KV
4, measurement range: 0KV ~ 50KV
5、電壓測量誤差：≤ 2％
5, voltage measurement error is less than 2%.
6、升壓速率：    0.1kV/s ～10 kV/s
6, pressure rate: 0.1kV/s ~ 10 kV/s
7、耐壓試驗電壓：10～50KV連續可調
7, voltage withstand test voltage: 10 ~ 50KV continuously adjustable
8、耐壓時間：    0～4H（無電流導通情況下）
8, pressure time: 0 ~ 4H (no current situation)
9、電源：        220V±10%的單相交流電壓和50Hz±1%的頻率
9 power: 220V + 10% 50Hz + 1% single-phase AC voltage and frequency
10、電源電壓穩定度外界電源電壓波動≤10%
10, the power supply voltage stability of the external power supply voltage fluctuation is less than or equal to 10%
11、長×寬×高700mm×800mm×1650mm
11, length * width * high 700mm * 800mm * 1650mm
12、設備自重：    100kg
12, equipment weight: 100kg
13、運行環境溫度：15 ～ 30℃，相對濕度：30%～85%能夠穩定運行。
13, operating environment temperature: 15 ~ 30 degrees, relative humidity: 30% ~ 85% can be stable operation.
14、接地要求儀器需要單獨接地，接地附合國家標準要求
14, grounding requirements instruments need to be grounded alone, and then meet the requirements of the national standard
15、接地電阻要求≤4Ω（用戶實驗室自行準備）
15, grounding resistance less than 4 ohm (user laboratory preparation)
四、主要配置：
Four, the main configuration:
1、主機         一臺
1, the host a
2、試驗臺       一個
2 test a
3、油盒         一個
3, oil box a
4、試驗電極     三個
4, the test electrode three
5、自動放電裝置 一套
5, automatic discharge device
6、試驗軟件     一套
6, a set of test software
7、計算機       一臺
7, a computer
8、噴墨打印機   一臺
8, a inkjet printer
9、電源線數據線 一套
9, a set of power line data
五、安全說明：
Five, safety instructions:
1、要安裝單獨的保護地線，主要是減少試樣擊穿時對周圍產生的較強的電磁干擾。也可避免控制計算機失控。
1, to install a separate protective ground, mainly to reduce the breakdown of the sample around the strong electromagnetic interference generated. Can also avoid the control of computer control.
2、直流試驗放電保護功能:在設備做完直流試驗時,當開啟試驗門時設備會自動保護,直至使用設備上的放電裝置放電后保護會自動取消.(注：因為直流試驗后不放電會危險到人身安全,不能直接拿取電極,起到提醒使用人員放電以免造成傷害)。
2, DC discharge protection function: test equipment in DC test finished, the device will automatically open the door when the protection test device, discharge device after discharge until the use of protection will be automatically canceled. (Note: because the DC test not put electricity danger to personal safety, can not directly take to remind the use of electrodes. Discharge of personnel so as to avoid injury).
3、增配試驗手動放電裝置，隨主機為一體化，當直流試驗過程中突然斷電，可采用手動放電棒進行放電，保證試驗人員的人身安全。
3, equipped with a manual test discharge device, with the host for the integration, when sudden power DC test process, can adopt manual discharging rod to discharge, ensure the personal safety of testing personnel.
4、該試驗設備的電路設有多項保護措施，主要有：過流保護、失壓保護、漏電保護、短路保護、直流試驗放電保護等。
4, the circuit of the test equipment is equipped with a number of protective measures, mainly include: over current protection, voltage loss protection, leakage protection, short-circuit protection, DC test discharge protection, etc..
5、六級高壓安全斷電控制：
5, six level high voltage safety power control:
                  1、總電源開關
1, the total power switch
                  2、高壓斷電開關（鑰匙開關）
2, high pressure switch (key switch)
                  3、調壓器復位開關
3, voltage regulator reset switch
                  4、試驗箱門安全開關
4 test box, door safety switch
                  5、高壓變壓器輸入端限流空開
5, high voltage transformer input limit open flow
                  6、漏電保護開關
6, leakage protection switch